Original file
Steyr 4075 Bosch EDC17C49 CBFGAT02_A5B_QG5+_UTM55kW_T4A / 1037513060
An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Steyr 4075, hardware number CBFGAT02_A5B_QG5+_UTM55kW_T4A and software number 1037513060, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Steyr 40753.4 diesel 75PS
- Control unit
- Bosch EDC17C49
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- CBFGAT02_A5B_QG5+_UTM55kW_T4A
- Software number
- 1037513060
- Software / calibration
- P_826_EDC17C49_671
Technical data
| Brand | Steyr |
|---|---|
| Car model | 4075 |
| Engine | 3.4 diesel 75PS |
| Power | 75.0PS / 55.2kW |
| Control unit | Bosch EDC17C49 |
|---|---|
| ECU maker | Bosch |
| Hardware number | CBFGAT02_A5B_QG5+_UTM55kW_T4A |
| Software number | 1037513060 |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 50bd543b27e2ad43 |
| ECU name | EDC17C49 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1797 | |
| Bosch part / software | 1037513060 | Offset in the file: 0x01801A |
| Software / calibration | P_826_EDC17C49_671 | Offset in the file: 0x055774 |
| Bosch project identifier (EPK) | 48/1/EDC17C49_C/242/P_826//P_826_EDC17C49_671/// | Offset in the file: 0x055774 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number CBFGAT02_A5B_QG5+_UTM55kW_T4A and software number 1037513060. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C49
| Hardware | Software | Vehicles |
|---|---|---|
| C150470T6LS00GKI0D570P01 | 1037513112 | Iveco Daily |
| C150470T6LS00GKI0D570P01.HEX | 1037513112 | Iveco Daily |
| C155470V6HS0DGGI0D920P02 | 5802338413 | Iveco Daily, Iveco Morelo |
| C155470V6HS0DGGI0D921P05 | 5802338413 | Iveco Daily |
| EDC17C49 | 1037511380 | Jeep Grand Cherokee WK2 |
| JCBAHC125X13 | 1037513011 | Fiat FREEMONT |
| JCBAHC129X04 | 1037539609 | Fiat FREEMONT |
| JCBMHC125X08 | 1037519867 | Fiat Freemont |