Original file

Fiat FREEMONT Bosch EDC17C49 JCBAHC129X04 / 1037539609

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Fiat FREEMONT, hardware number JCBAHC129X04 and software number 1037539609, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat FREEMONT2.0 diesel 170PS
Control unit
Bosch EDC17C49
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
JCBAHC129X04
Software number
1037539609
Software / calibration
P_1060_EDC17C49_C129J113

Technical data

Vehicle
BrandFiat
Car modelFREEMONT
Engine2.0 diesel 170PS
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberJCBAHC129X04
Software number1037539609
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key38ef1a5cd815f76f
Identification read from the file
ECU nameEDC17C49
Read typeCalibration only (data set)
Bosch part / software1037539609Offset in the file: 0x00001A
Software / calibrationP_1060_EDC17C49_C129J113Offset in the file: 0x000228
Bosch project identifier (EPK)55/1/EDC17_C49/1060/P_1060//P_1060_EDC17C49_C129J113///Offset in the file: 0x000228

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number JCBAHC129X04 and software number 1037539609. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page