Original file

Fiat Freemont Bosch EDC17C49 O40JTD40 / 1037513011

An original (stock) flash read of the Bosch EDC17C49 control unit, fitted in Fiat Freemont, hardware number O40JTD40 and software number 1037513011, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Fiat Freemont2.0 diesel · 170.0PS / 125.0kW
Control unit
Bosch EDC17C49
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
O40JTD40
Software number
1037513011
Bosch part / software
1037519867
Software / calibration
P_1060_EDC17C49_C125J113

Technical data

Vehicle
BrandFiat
Car modelFreemont
Engine2.0 diesel
Power170.0PS / 125.0kW
Control unit
Control unitBosch EDC17C49
ECU makerBosch
Hardware numberO40JTD40
Software number1037513011
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keya6e94628e5871b18
Identification read from the file
ECU nameEDC17C49
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037519867Offset in the file: 0x02001A
Software / calibrationP_1060_EDC17C49_C125J113Offset in the file: 0x038DA8
Bosch project identifier (EPK)55/1/EDC17_C49/1060/P_1060//P_1060_EDC17C49_C125J113///Offset in the file: 0x038DA8

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C49 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number O40JTD40 and software number 1037513011. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C49

HardwareSoftwareVehicles
MAW1VDC124XX02H1037516745Jeep Grand Cherokee
MAW1VDC126XX01H1037511380Chrysler Jeep Grand Cherokee, Chrysler Grand Cherokee, Jeep
MAW1VDC126XX01H1037519861Chrysler Jeep Grand Cherokee
MAW1VDC126XX01L1037511380Jeep Grand Cherokee
MAW1VDC126XX03H1037511380Chrysler Jeep Grand Cherokee
MAW1VDC126XX03L1037541391Chrysler Jeep Grand Cherokee
MAW2VDC126XX01G1037511380Jeep Grand Cherokee
RAW1VDC126XX07H1037511380Jeep Grand Cherokee

Bosch EDC17C49 original files

The Bosch EDC17C49 unit page