Original file

BMW 2er 220d Bosch EDC17C50 00000A0A061C00 / O_7HME0-00005172-033

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW 2er 220d, hardware number 00000A0A061C00 and software number O_7HME0-00005172-033, 16,384.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2er 220ddiesel 190.0PS / 139.7kW
Control unit
Bosch EDC17C50
Read type
Full read (boot area included)
File
16,384.00 KB · Flash
Hardware number
00000A0A061C00
Software number
O_7HME0-00005172-033

Technical data

Vehicle
BrandBMW
Car model2er 220d
Enginediesel 190.0PS / 139.7kW
Displacement2.0
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware number00000A0A061C00
Software numberO_7HME0-00005172-033
File
File typeOriginal flash read
File size16,384.00 KB (16,777,216 bytes)
File key1230f1daf08897d9
Identification read from the file
ECU nameEDC17C50
Read typeFull read (boot area included)
Bosch project identifier (EPK)38/1/EDC17_C50_C56/11/P_1320//VHME0///Offset in the file: 0x25D3BC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00000A0A061C00 and software number O_7HME0-00005172-033. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page