Original file

BMW X3 X3-30d Bosch EDC17C50 00001B7446151B / O_7FTL0-00001B74-027

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW X3 X3-30d, hardware number 00001B7446151B and software number O_7FTL0-00001B74-027, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X3 X3-30ddiesel 258.0PS / 189.8kW
Control unit
Bosch EDC17C50
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
00001B7446151B
Software number
O_7FTL0-00001B74-027

Technical data

Vehicle
BrandBMW
Car modelX3 X3-30d
Enginediesel 258.0PS / 189.8kW
Displacement3.0
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware number00001B7446151B
Software numberO_7FTL0-00001B74-027
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye6328be5a3e8db51
Identification read from the file
ECU nameEDC17C50
Read typeCalibration only (data set)
Data set descriptionN57D30O1-F25N57O1_EU6
Bosch project identifier (EPK)37/1/EDC17_C50_C56/11/P_735//VFTL0///Offset in the file: 0x1012A0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00001B7446151B and software number O_7FTL0-00001B74-027. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page