Original file

BMW 3er 316D Bosch EDC17C50 00002F1B6E0B6A / O_7HJB2-00002F1B-106

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW 3er 316D, hardware number 00002F1B6E0B6A and software number O_7HJB2-00002F1B-106, 12,288.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 3er 316Ddiesel 116.0PS / 85.3kW
Control unit
Bosch EDC17C50
Read type
Full read (boot area included)
File
12,288.00 KB · Flash
Hardware number
00002F1B6E0B6A
Software number
O_7HJB2-00002F1B-106

Technical data

Vehicle
BrandBMW
Car model3er 316D
Enginediesel 116.0PS / 85.3kW
Displacement2.0
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware number00002F1B6E0B6A
Software numberO_7HJB2-00002F1B-106
File
File typeOriginal flash read
File size12,288.00 KB (12,582,912 bytes)
File keyc2fc5d9fa630c594
Identification read from the file
ECU nameEDC17C50
Read typeFull read (boot area included)
Data set descriptionB47D20K0-F30B47K0_EU6A
Bosch project identifier (EPK)38/1/EDC17_C50_C56/11/P_1320//VHJB2///Offset in the file: 0x25A778

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 00002F1B6E0B6A and software number O_7HJB2-00002F1B-106. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page