Original file

BMW X1 Bosch EDC17C50 0281018813 / 1037528827

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW X1, hardware number 0281018813 and software number 1037528827, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW X12.0 diesel 115PS
Control unit
Bosch EDC17C50
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0281018813
Software number
1037528827
Vehicle maker's hardware number
8574351

Technical data

Vehicle
BrandBMW
Car modelX1
Engine2.0 diesel 115PS
Power115.0PS / 84.6kW
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware number0281018813
Software number1037528827
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key26c5004744794718
Identification read from the file
ECU nameEDC17C41
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037528827Offset in the file: 0x02001A
Vehicle maker's hardware number8574351Offset in the file: 0x00FEAA
Bosch project identifier (EPK)32/1/EDC17_C41/11/P_746//VCWC///Offset in the file: 0x24E83C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281018813 and software number 1037528827. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page