Original file

BMW 2016y Bosch EDC17C50 0281034971 / 1037563826

An original (stock) flash read of the Bosch EDC17C50 control unit, fitted in BMW 2016y, hardware number 0281034971 and software number 1037563826, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
BMW 2016yB47D20
Control unit
Bosch EDC17C50
Read type
Full read (boot area included)
File
4,096.00 KB · Flash with its EEPROM
Hardware number
0281034971
Software number
1037563826

Technical data

Vehicle
BrandBMW
Car model2016y
EngineB47D20
FuelDiesel
Displacement2.0
Control unit
Control unitBosch EDC17C50
ECU makerBosch
Hardware number0281034971
Software number1037563826
File
File typeOriginal flash read with its EEPROM
File size4,096.00 KB (4,194,304 bytes)
From the file nameBMW 2016y
File keydebe6f6e6cfe135e
Identification read from the file
ECU nameEDC17C50
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037563826Offset in the file: 0x01801A
Data set descriptionB47D20O0-F30B47O0_EU5A
Bosch project identifier (EPK)38/1/EDC17_C50_C56/11/P_1320//VHLL0///Offset in the file: 0x25B124

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C50 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0281034971 and software number 1037563826. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C50

Bosch EDC17C50 original files

The Bosch EDC17C50 unit page