Original file

Hyundai Santa Fe Bosch EDC17C53 40DM502MCVERI2RL / 1037544609

An original (stock) flash read of the Bosch EDC17C53 control unit, fitted in Hyundai Santa Fe, hardware number 40DM502MCVERI2RL and software number 1037544609, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai Santa Fe2.0 diesel · 150.0PS / 110.3kW
Control unit
Bosch EDC17C53
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
40DM502MCVERI2RL
Software number
1037544609
Vehicle maker's hardware number
39101-2F331

Technical data

Vehicle
BrandHyundai
Car modelSanta Fe
Engine2.0 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C53
ECU makerBosch
Hardware number40DM502MCVERI2RL
Software number1037544609
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8d7114b2696e8140
Identification read from the file
ECU nameEDC17C53
Read typeCalibration only (data set)
Bosch part / software1037544609Offset in the file: 0x04001A
Vehicle maker's hardware number39101-2F331Offset in the file: 0x020AF0
Bosch project identifier (EPK)39/1/EDC17_C53/147/P1100//P1100_T40B///Offset in the file: 0x040204

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C53 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 40DM502MCVERI2RL and software number 1037544609. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C53

Bosch EDC17C53 original files

The Bosch EDC17C53 unit page