Original file

Volkswagen Crafter Bosch EDC17C54 03L906012A / 10SW086728

An original (stock) flash read of the Bosch EDC17C54 control unit, fitted in Volkswagen Crafter, hardware number 03L906012A and software number 10SW086728, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Crafter2.0 diesel 108PS
Control unit
Bosch EDC17C54
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906012A
Software number
10SW086728
Software / calibration
03L997403G

Technical data

Vehicle
BrandVolkswagen
Car modelCrafter
Engine2.0 diesel 108PS
Power108.8PS / 80.0kW
Control unit
Control unitBosch EDC17C54
ECU makerBosch
Hardware number03L906012A
Software number10SW086728
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyccfa1b240821a722
Identification read from the file
ECU nameEDC17C54
Read typeFull read (boot area included)
Bosch part / software10SW086728Offset in the file: 0x02001A
Vehicle maker's hardware number03L906012AOffset in the file: 0x2DFA3A
Software / calibration03L997403G · version 9980Offset in the file: 0x2DFA54
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)35/1/EDC17_C54/5/P874//C874DP5WV///Offset in the file: 0x036440

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906012A and software number 10SW086728. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C54

HardwareSoftwareVehicles
03L906012A10SW086674Volkswagen Crafter
03L906012A10SW086680Volkswagen Crafter
03L906012A10SW086702Volkswagen Crafter
03L906012A10SW086703Volkswagen Crafter
03L906012A10SW087022Volkswagen Crafter
03L906012A10SW087025Volkswagen Crafter
03L906012A10SW087026Volkswagen Crafter
03L906012AA1037524140Volkswagen pcmflash

Bosch EDC17C54 original files

The Bosch EDC17C54 unit page