Original file

Volkswagen Bosch EDC17C54 03L907309AB / 1037515549

An original (stock) flash read of the Bosch EDC17C54 control unit, fitted in Volkswagen, hardware number 03L907309AB and software number 1037515549, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen3.4 petrol
Control unit
Bosch EDC17C54
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L907309AB
Software number
1037515549
Bosch part / software
10SW073766
Software / calibration
03L906012AA

Technical data

Vehicle
BrandVolkswagen
Engine3.4 petrol
Control unit
Control unitBosch EDC17C54
ECU makerBosch
Hardware number03L907309AB
Software number1037515549
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5d38169bf26504f2
Identification read from the file
ECU nameEDC17C54
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software10SW073766Offset in the file: 0x02001A
Vehicle maker's hardware number03L907309ABOffset in the file: 0x2D76CA
Software / calibration03L906012AA · version 9978Offset in the file: 0x2D76E4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)37/1/EDC17_C54/5/P1109//C1109DK6A1///Offset in the file: 0x03C8C0

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for lambda off, EGR off, flaps off, start/stop off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C54 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L907309AB and software number 1037515549. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C54

HardwareSoftwareVehicles
03L906012T1037535331Volkswagen pcmflash
03L906012T1037536694Volkswagen pcmflash
03L906012T1037561089Volkswagen pcmflash
03L907309AB03L907309ABVolkswagen Amarok
03L907309AB1037526311Volkswagen Amarok
03L907309AB1037526327Volkswagen Amarok
03L907309AB1037526328Volkswagen Amarok
03L907309AB1037526329Volkswagen Amarok

Bosch EDC17C54 original files

The Bosch EDC17C54 unit page