Original file

Kia Carnival 2.2TDCi Bosch EDC17C57 0193371200 / 10SW019337

An original (stock) flash read of the Bosch EDC17C57 control unit, fitted in Kia Carnival 2.2TDCi, hardware number 0193371200 and software number 10SW019337, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Kia Carnival 2.2TDCi2.2 diesel 202HP
Control unit
Bosch EDC17C57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0193371200
Software number
10SW019337

Technical data

Vehicle
BrandKia
Car modelCarnival 2.2TDCi
Engine2.2 diesel 202HP
Control unit
Control unitBosch EDC17C57
ECU makerBosch
Hardware number0193371200
Software number10SW019337
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file nameKia Carnival 202HP
File key0161663e00a5187b
Identification read from the file
ECU nameEDC17C57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW019337Offset in the file: 0x02001A
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00F39B
Bosch project identifier (EPK)39/1/EDC17_C57/147/P1200//P1200_RG0A///Offset in the file: 0x04167C

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0193371200 and software number 10SW019337. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C57

Bosch EDC17C57 original files

The Bosch EDC17C57 unit page