Original file

Hyundai Santa Fe Bosch EDC17C57 71TMC2NAICEIR202 / 391F0-2FED0

An original (stock) flash read of the Bosch EDC17C57 control unit, fitted in Hyundai Santa Fe, hardware number 71TMC2NAICEIR202 and software number 391F0-2FED0, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai Santa Fe2.2 diesel · 200.0PS / 147.1kW
Control unit
Bosch EDC17C57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
71TMC2NAICEIR202
Software number
391F0-2FED0
Bosch part / software
10SW036343

Technical data

Vehicle
BrandHyundai
Car modelSanta Fe
Engine2.2 diesel
Power200.0PS / 147.1kW
Control unit
Control unitBosch EDC17C57
ECU makerBosch
Hardware number71TMC2NAICEIR202
Software number391F0-2FED0
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyec8e5f7330555759
Identification read from the file
ECU nameEDC17C57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW036343Offset in the file: 0x02001A
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00F39B
Bosch project identifier (EPK)39/1/EDC17_C57/147/P1587//P1587_U71A///Offset in the file: 0x044E70

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 71TMC2NAICEIR202 and software number 391F0-2FED0. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C57

Bosch EDC17C57 original files

The Bosch EDC17C57 unit page