Original file
Hyundai Palisade Bosch EDC17C57 91LXC2NAICDIR202391Q0-2FDA0- / 91LXC4NAICDIR202391Q0-2FDA0-
An original (stock) flash read of the Bosch EDC17C57 control unit, fitted in Hyundai Palisade, hardware number 91LXC2NAICDIR202391Q0-2FDA0- and software number 91LXC4NAICDIR202391Q0-2FDA0-, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.
Is this your file?
Compare these numbers with the label on your control unit before you order.
- Vehicle
- Hyundai Palisade2.2 diesel · 200.0PS / 147.1kW
- Control unit
- Bosch EDC17C57
- Read type
- Full read (boot area included)
- File
- 4,096.00 KB · Flash
- Hardware number
- 91LXC2NAICDIR202391Q0-2FDA0-
- Software number
- 91LXC4NAICDIR202391Q0-2FDA0-
- Bosch part / software
- 10SW046823
Technical data
| Brand | Hyundai |
|---|---|
| Car model | Palisade |
| Engine | 2.2 diesel |
| Power | 200.0PS / 147.1kW |
| Control unit | Bosch EDC17C57 |
|---|---|
| ECU maker | Bosch |
| Hardware number | 91LXC2NAICDIR202391Q0-2FDA0- |
| Software number | 91LXC4NAICDIR202391Q0-2FDA0- |
| File type | Original flash read |
|---|---|
| File size | 4,096.00 KB (4,194,304 bytes) |
| File key | 1334d7e65b84785e |
| ECU name | EDC17C57 | |
|---|---|---|
| Read type | Full read (boot area included) | |
| Processor | TC1793 | |
| Bosch part / software | 10SW046823 | Offset in the file: 0x02001A |
| Internal build string | ME(D)/EDC17 B_CB.02.05.00 | Offset in the file: 0x00F39B |
| Bosch project identifier (EPK) | 39/1/EDC17_C57/147/P1587//P1587_U91A/// | Offset in the file: 0x045314 |
About this file
Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.
In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.
How to use this file
- Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
- Open the file in your programmer, compare its numbers with your unit and check the checksum.
- Write it only to a Bosch EDC17C57 whose label carries the same hardware and software numbers.
Before you write Compare the numbers on your control unit with this file, hardware number 91LXC2NAICDIR202391Q0-2FDA0- and software number 91LXC4NAICDIR202391Q0-2FDA0-. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.
Other pairs of Bosch EDC17C57
| Hardware | Software | Vehicles |
|---|---|---|
| 40TLC4EAIDEIRV06391L0-2FEF0- | 10SW055412 | Kia Sportage |
| 71TMC2NAICDIR204391F0-2FDB0- | 10SW039552 | Hyundai Santa Fe |
| 71TMC2NAICEIR202 | 391F0-2FED0 | Hyundai Santa Fe |
| 71TMC2NAICEIR204391F0-2FED0- | 71TMC4NAICEIR204391F0-2FED0- | Hyundai Santa Fe |
| 92UB600MN0EIU402 | 1037552197 | Kia Rio |
| 92UM62NAICEIR20239110-2FBB5 | 1037550574 | Kia Sorento |
| A1VF600AA0EIU70239140-2A520- | 1037552254 | Hyundai i40 |
| B0JD6H0MA0EIU601 | 1037556539 | Kia Cee`d |