Original file

Hyundai i20 Bosch EDC17C57 D0GB600MN0EIU40139140-2A150- / 1037557160

An original (stock) flash read of the Bosch EDC17C57 control unit, fitted in Hyundai i20, hardware number D0GB600MN0EIU40139140-2A150- and software number 1037557160, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai i201.4 diesel · 90.0PS / 66.2kW
Control unit
Bosch EDC17C57
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
D0GB600MN0EIU40139140-2A150-
Software number
1037557160

Technical data

Vehicle
BrandHyundai
Car modeli20
Engine1.4 diesel
Power90.0PS / 66.2kW
Control unit
Control unitBosch EDC17C57
ECU makerBosch
Hardware numberD0GB600MN0EIU40139140-2A150-
Software number1037557160
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key91462a7c8968e3b0
Identification read from the file
ECU nameEDC17C57
Read typeCalibration only (data set)
Bosch part / software1037557160Offset in the file: 0x00001A
Bosch project identifier (EPK)39/1/EDC17_C57/147/P1200//P1200_RD0A///Offset in the file: 0x000204

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number D0GB600MN0EIU40139140-2A150- and software number 1037557160. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C57

Bosch EDC17C57 original files

The Bosch EDC17C57 unit page