Original file

Kia Sportage Bosch EDC17C57 F1QL600MA0EIU703 / 10SW024373

An original (stock) flash read of the Bosch EDC17C57 control unit, fitted in Kia Sportage, hardware number F1QL600MA0EIU703 and software number 10SW024373, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Kia Sportage1.7 diesel 116PS
Control unit
Bosch EDC17C57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
F1QL600MA0EIU703
Software number
10SW024373

Technical data

Vehicle
BrandKia
Car modelSportage
Engine1.7 diesel 116PS
Power116.0PS / 85.3kW
Control unit
Control unitBosch EDC17C57
ECU makerBosch
Hardware numberF1QL600MA0EIU703
Software number10SW024373
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyba9a62f78329eee3
Identification read from the file
ECU nameEDC17C57
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW024373Offset in the file: 0x02001A
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00F307
Bosch project identifier (EPK)39/1/EDC17_C57/147/P1200//P1200_RF1A///Offset in the file: 0x041594

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1QL600MA0EIU703 and software number 10SW024373. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C57

Bosch EDC17C57 original files

The Bosch EDC17C57 unit page