Original file

Hyundai Tucson Bosch EDC17C57 F1TL52NANFTIR00139120-2FFF4- / F1TL54NANFTIR00139120-2FFF4-

An original (stock) flash read of the Bosch EDC17C57 control unit, fitted in Hyundai Tucson, hardware number F1TL52NANFTIR00139120-2FFF4- and software number F1TL54NANFTIR00139120-2FFF4-, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Hyundai Tucson2.0 diesel · 185.0PS / 136.1kW
Control unit
Bosch EDC17C57
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
F1TL52NANFTIR00139120-2FFF4-
Software number
F1TL54NANFTIR00139120-2FFF4-
Bosch part / software
10SW021538

Technical data

Vehicle
BrandHyundai
Car modelTucson
Engine2.0 diesel
Power185.0PS / 136.1kW
Control unit
Control unitBosch EDC17C57
ECU makerBosch
Hardware numberF1TL52NANFTIR00139120-2FFF4-
Software numberF1TL54NANFTIR00139120-2FFF4-
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key80177888f300fe87
Identification read from the file
ECU nameEDC17C57
Read typeFull read (boot area included)
Bosch part / software10SW021538Offset in the file: 0x00001A
Internal build stringME(D)/EDC17 B_CB.02.05.00Offset in the file: 0x00F307
Bosch project identifier (EPK)39/1/EDC17_C57/147/P1200//P1200_RF1A///Offset in the file: 0x200204

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C57 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number F1TL52NANFTIR00139120-2FFF4- and software number F1TL54NANFTIR00139120-2FFF4-. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C57

Bosch EDC17C57 original files

The Bosch EDC17C57 unit page