Original file

Honda Civic Bosch EDC17C58 37805-59N-G160 / 10SW051664

An original (stock) flash read of the Bosch EDC17C58 control unit, fitted in Honda Civic, hardware number 37805-59N-G160 and software number 10SW051664, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda Civic1.6 120PS
Control unit
Bosch EDC17C58
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
37805-59N-G160
Software number
10SW051664
Software / calibration
P1586C58E_V120

Technical data

Vehicle
BrandHonda
Car modelCivic
Engine1.6 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C58
ECU makerBosch
Hardware number37805-59N-G160
Software number10SW051664
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key17152fe8195c0144
Identification read from the file
ECU nameEDC17C58
Read typeFull read (boot area included)
Bosch part / software10SW051664Offset in the file: 0x02001A
Software / calibrationP1586C58E_V120Offset in the file: 0x049988
Internal build stringPCFG:CB/159_1793_1.0.0Offset in the file: 0x00FC5C
Bosch project identifier (EPK)42/1/EDC17C58/159/P1586//P1586C58E_V120///Offset in the file: 0x049988

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C58 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 37805-59N-G160 and software number 10SW051664. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C58

Bosch EDC17C58 original files

The Bosch EDC17C58 unit page