Original file

Honda CR-V Bosch EDC17C58 37805-R5Z-G690 / 10SW018967

An original (stock) flash read of the Bosch EDC17C58 control unit, fitted in Honda CR-V, hardware number 37805-R5Z-G690 and software number 10SW018967, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda CR-V1.6 160PS
Control unit
Bosch EDC17C58
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
37805-R5Z-G690
Software number
10SW018967
Bosch part / software
10SW060864
Software / calibration
P1327C58E_V127

Technical data

Vehicle
BrandHonda
Car modelCR-V
Engine1.6 160PS
Power160.0PS / 117.7kW
Control unit
Control unitBosch EDC17C58
ECU makerBosch
Hardware number37805-R5Z-G690
Software number10SW018967
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1091d6cb55b5df08
Identification read from the file
ECU nameEDC17C58
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software10SW060864Offset in the file: 0x02001A
Software / calibrationP1327C58E_V127Offset in the file: 0x045C68
Internal build stringPCFG:CB/159_1793_1.0.0Offset in the file: 0x00FC5C
Bosch project identifier (EPK)42/1/EDC17C58/159/P1327//P1327C58E_V127///Offset in the file: 0x045C68

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for the solutions it supports, such as DPF off, EGR off, lambda off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C58 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 37805-R5Z-G690 and software number 10SW018967. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C58

Bosch EDC17C58 original files

The Bosch EDC17C58 unit page