Original file

Honda CR-V IV Bosch EDC17C58 37820RSXG050M6 / 1037537873

An original (stock) flash read of the Bosch EDC17C58 control unit, fitted in Honda CR-V IV, hardware number 37820RSXG050M6 and software number 1037537873, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Honda CR-V IV1.6 · 120.0PS / 88.3kW
Control unit
Bosch EDC17C58
Read type
OBD read (no boot area)
File
4,096.00 KB · Flash
Hardware number
37820RSXG050M6
Software number
1037537873
Software / calibration
P933V122S00W134400_TPROT

Technical data

Vehicle
BrandHonda
Car modelCR-V IV
Engine1.6
FuelDiesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C58
ECU makerBosch
Hardware number37820RSXG050M6
Software number1037537873
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key3bd4d55aff071eec
Identification read from the file
ECU nameEDC17C58
Read typeOBD read (no boot area)
ProcessorTC1793
Bosch part / software1037537873Offset in the file: 0x02001A
Software / calibrationP933V122S00W134400_TPROTOffset in the file: 0x040650
Internal build stringPCFG:CB/159_1793_1.0.0Offset in the file: 0x00FC5C
Bosch project identifier (EPK)51/1/EDC17C58/159/P933//P933V122S00W134400_TPROT///Offset in the file: 0x040650

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C58 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 37820RSXG050M6 and software number 1037537873. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C58

Bosch EDC17C58 original files

The Bosch EDC17C58 unit page