Original file

Peugeot 3008 Bosch EDC17C60 0389999999 / 10SW014060

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot 3008, hardware number 0389999999 and software number 10SW014060, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 30081.6 · 120.0PS / 88.3kW
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
0389999999
Software number
10SW014060
Software / calibration
6B2K_PUK9B_4A7O2_9692501880

Technical data

Vehicle
BrandPeugeot
Car model3008
Engine1.6
FuelDiesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number0389999999
Software number10SW014060
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keydbd4c37c919f7da7
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW014060Offset in the file: 0x00001A
Software / calibration6B2K_PUK9B_4A7O2_9692501880Offset in the file: 0x1FCF08
Bosch project identifier (EPK)59/1/EDC17C60/014/P1110//C71c/6B2K_PUK9B_4A7O2_9692501880//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0389999999 and software number 10SW014060. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
0281034188017855Opel Grandland
0281034189017935Peugeot Partner
028103418921111100Opel Crossland X
028103418998655557Opel GrandLand
038999999910SW017935Peugeot Expert
08001502311037555072Citroën Berlingo
08001503271037555072
08001503971037555072Toyota ProAce

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page