Original file

Toyota ProAce Bosch EDC17C60 0800150397 / 1037555072

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Toyota ProAce, hardware number 0800150397 and software number 1037555072, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Toyota ProAce1.6 diesel 95PS
Control unit
Bosch EDC17C60
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0800150397
Software number
1037555072
Software / calibration
6E2G_PIE9B_4A6OH_9692358080

Technical data

Vehicle
BrandToyota
Car modelProAce
Engine1.6 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number0800150397
Software number1037555072
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7cdca0fbd7abc0bf
Identification read from the file
ECU nameEDC17C60
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software1037555072Offset in the file: 0x02001A
Software / calibration6E2G_PIE9B_4A6OH_9692358080Offset in the file: 0x3FCF08
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)48/1/EDC17_C60/14///P1110_PSA_DS_P1110_C7_0_7///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0800150397 and software number 1037555072. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page