Original file

Peugeot 208 Bosch EDC17C60 0800170798 / 1037555072

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot 208, hardware number 0800170798 and software number 1037555072, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 2081.6 diesel · 100.0PS / 73.5kW
Control unit
Bosch EDC17C60
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
0800170798
Software number
1037555072
Bosch part / software
10SW016305
Vehicle maker's hardware number
9877777777
Software / calibration
6D2G_1KE9B_4A6OD_9692540280

Technical data

Vehicle
BrandPeugeot
Car model208
Engine1.6 diesel
Power100.0PS / 73.5kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number0800170798
Software number1037555072
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key8b6f3a26ee9eed53
Identification read from the file
ECU nameEDC17C60
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW016305Offset in the file: 0x02001A
Vehicle maker's hardware number9877777777Offset in the file: 0x31B130
Software / calibration6D2G_1KE9B_4A6OD_9692540280Offset in the file: 0x3FCF08
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)48/1/EDC17_C60/14///P1110_PSA_DS_P1110_C7_0_7///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 0800170798 and software number 1037555072. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page