Original file

Peugeot PHASE II Bosch EDC17C60 9692045980 / 10SW001546

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot PHASE II, hardware number 9692045980 and software number 10SW001546, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot PHASE II1.6 diesel · 120.0PS / 88.3kW
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
9692045980
Software number
10SW001546
Software / calibration
6B2G_PNQ9B_4A5O4_9692045980

Technical data

Vehicle
BrandPeugeot
Car modelPHASE II
Engine1.6 diesel
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9692045980
Software number10SW001546
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key87d107251e409264
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW001546Offset in the file: 0x00001A
Software / calibration6B2G_PNQ9B_4A5O4_9692045980Offset in the file: 0x1FCF08
Bosch project identifier (EPK)59/1/EDC17C60/014/P1110//C70h/6B2G_PNQ9B_4A5O4_9692045980//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9692045980 and software number 10SW001546. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
96920452801037555072Citroën Berlingo, Citroën Partner, Peugeot
96920454801037555072Peugeot 5008, Peugeot 3008
96920455801037555072Citroën C4
96920459801037555072Peugeot 308
96920460801037555072Peugeot 308
96920461801037555072Peugeot 308, Peugeot PHASE I
96920462801037555072Peugeot 508, Peugeot 308
96920463801037555072Peugeot 508, Peugeot Phase 2

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page