Original file

Peugeot 2008 Bosch EDC17C60 9692414480 / 10SW012204

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot 2008, hardware number 9692414480 and software number 10SW012204, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 20081.6 diesel 120PS
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
9692414480
Software number
10SW012204
Software / calibration
6B2G_1KN9B_4A5O4_9692414480

Technical data

Vehicle
BrandPeugeot
Car model2008
Engine1.6 diesel 120PS
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9692414480
Software number10SW012204
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key8895d7b728339053
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW012204Offset in the file: 0x00001A
Vehicle maker's hardware number9692414480Offset in the file: 0x1FCF37
Software / calibration6B2G_1KN9B_4A5O4_9692414480Offset in the file: 0x1FCF08
Bosch project identifier (EPK)59/1/EDC17C60/014/P1110//C70h/6B2G_1KN9B_4A5O4_9692414480//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9692414480 and software number 10SW012204. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
969239138010SW012053Peugeot 308
96923914801037555072Peugeot 208
969239148010SW012056Peugeot 208
96924144801037555072Peugeot 2008
9692418580012356Peugeot 308
96924185801037538361Peugeot 308
96924185801037540764Peugeot 308
969241858010SW012356Peugeot 308

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page