Original file

Peugeot 308 Bosch EDC17C60 9692449280 / 10SW013908

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot 308, hardware number 9692449280 and software number 10SW013908, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 3081.6 100PS
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
9692449280
Software number
10SW013908
Vehicle maker's hardware number
9877777777
Software / calibration
6F2G_PNB9B_4A6OF_9692449280

Technical data

Vehicle
BrandPeugeot
Car model308
Engine1.6 100PS
FuelDiesel
Power100.0PS / 73.5kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9692449280
Software number10SW013908
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key88219bffd2e26346
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW013908Offset in the file: 0x00001A
Vehicle maker's hardware number9877777777Offset in the file: 0x11B130
Software / calibration6F2G_PNB9B_4A6OF_9692449280Offset in the file: 0x1FCF08
Bosch project identifier (EPK)59/1/EDC17C60/014/P1110//C70h/6F2G_PNB9B_4A6OF_9692449280//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9692449280 and software number 10SW013908. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
96924488801037555072Peugeot 208
96924489801037555072Peugeot 208
96924490801037555072Citroën C4
96924492801037555072Peugeot 308
96924494801037555072Peugeot Expert, Peugeot 208, Peugeot Jumpy / SpaceTourer
96924495801037555072Peugeot 208
96924652801037555072Peugeot 208, Peugeot C4 Cactus, Citroën
96924877801037555072Citroën C3, Citroën C3 / C3 Picasso, Citroën Berlingo

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page