Original file

Citroën Jumpy Bosch EDC17C60 9692808180 / 10SW017935

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Citroën Jumpy, hardware number 9692808180 and software number 10SW017935, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Jumpy1.6 diesel 95PS
Control unit
Bosch EDC17C60
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9692808180
Software number
10SW017935
Vehicle maker's hardware number
9877777777
Software / calibration
6E2N_PIE9B_4A6O3_9692808180

Technical data

Vehicle
BrandCitroën
Car modelJumpy
Engine1.6 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9692808180
Software number10SW017935
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyc0cf49e0d9cfc58e
Identification read from the file
ECU nameEDC17C60
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW017935Offset in the file: 0x02001A
Vehicle maker's hardware number9877777777Offset in the file: 0x31B25C
Software / calibration6E2N_PIE9B_4A6O3_9692808180Offset in the file: 0x3FCF08
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)48/1/EDC17_C60/14///P1110_PSA_DS_P1110_C7_2_1///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9692808180 and software number 10SW017935. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Peugeot ExpertFlash2,048.00 KB€15Add to cart
PeugeotFlash4,096.00 KB€15Add to cart
Peugeot ExpertFlash4,096.00 KB€15Add to cart
Peugeot ExpertFlash4,096.00 KB€15Add to cart

All reads of 9692808180 / 10SW017935

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
9692792180017935Citroën Berlingo
96927921801037555072Citroën Berlingo
969279218010SW024084Citroën Berlingo
969279228010SW017935Citroën
969286808010SW017935Peugeot Partner / Tepee, Peugeot Partner
969286818010SW017935Citroën Berlingo, Citroën Partner, Peugeot
9692868380017935Citroën C4
969286838010SW017935Citroën C4, Citroën C4 Picasso 2017y 1.6HDI

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page