Original file

Citroën Berlingo Bosch EDC17C60 9692868180 / 10SW017935

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Citroën Berlingo, hardware number 9692868180 and software number 10SW017935, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Berlingo1.6 100PS
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
9692868180
Software number
10SW017935
Vehicle maker's hardware number
9877777777
Software / calibration
6D2N_2IF9B_4A8O3_9692868180

Technical data

Vehicle
BrandCitroën
Car modelBerlingo
Engine1.6 100PS
FuelDiesel
Power100.0PS / 73.5kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9692868180
Software number10SW017935
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key0142c57942ab9a22
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW017935Offset in the file: 0x00001A
Vehicle maker's hardware number9877777777Offset in the file: 0x11B25C
Software / calibration6D2N_2IF9B_4A8O3_9692868180Offset in the file: 0x1FCF08
Bosch project identifier (EPK)58/1/EDC17C60/014/1110//C72B/6D2N_2IF9B_4A8O3_9692868180//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9692868180 and software number 10SW017935. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Peugeot PartnerFlash4,096.00 KB€15Add to cart

All reads of 9692868180 / 10SW017935

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
969279218010SW024084Citroën Berlingo
969279228010SW017935Citroën
969280818010SW017935Peugeot Expert, Peugeot Jumpy, Citroën
969286808010SW017935Peugeot Partner / Tepee, Peugeot Partner
9692868380017935Citroën C4
969286838010SW017935Citroën C4, Citroën C4 Picasso 2017y 1.6HDI
969287408010SW017935Peugeot 208
969287458010SW017855Peugeot 3008, Peugeot 5008

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page