Original file

Citroën Jumpy Bosch EDC17C60 9692927280 / 10SW017935

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Citroën Jumpy, hardware number 9692927280 and software number 10SW017935, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Jumpy1.6 diesel 115PS
Control unit
Bosch EDC17C60
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9692927280
Software number
10SW017935
Software / calibration
6B2N_PUK9B_4AAO3_9692927280

Technical data

Vehicle
BrandCitroën
Car modelJumpy
Engine1.6 diesel 115PS
Power115.0PS / 84.6kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9692927280
Software number10SW017935
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7829b745e437446b
Identification read from the file
ECU nameEDC17C60
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW017935Offset in the file: 0x02001A
Software / calibration6B2N_PUK9B_4AAO3_9692927280Offset in the file: 0x3FCF08
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)48/1/EDC17_C60/14///P1110_PSA_DS_P1110_C7_2_1///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9692927280 and software number 10SW017935. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
969291698010SW017935Citroën Berlingo
969291698010SW024978Peugeot Partner
9692917180017935Peugeot Partner
969291718010SW017935Citroën Berlingo
9692927380017855Peugeot 5008
969292738010SW017855Peugeot 3008, Peugeot 5008
969292858010SW017935Citroën C3
969292888010SW017935Peugeot 3008, Peugeot 308

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page