Original file

Peugeot 3008 Bosch EDC17C60 9693196780 / 10SW017935

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot 3008, hardware number 9693196780 and software number 10SW017935, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 30081.6 diesel 120PS
Control unit
Bosch EDC17C60
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
9693196780
Software number
10SW017935
Bosch part / software
10SW034734
Software / calibration
6B2N_PUK9B_4AAO4_9693196780

Technical data

Vehicle
BrandPeugeot
Car model3008
Engine1.6 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9693196780
Software number10SW017935
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key399c60f95bf0a3c3
Identification read from the file
ECU nameEDC17C60
Read typeFull read (boot area included)
ProcessorTC1793
Bosch part / software10SW034734Offset in the file: 0x02001A
Software / calibration6B2N_PUK9B_4AAO4_9693196780Offset in the file: 0x3FCF08
Internal build stringCB_014_TC1793_3.1.0Offset in the file: 0x00409A
Bosch project identifier (EPK)48/1/EDC17_C60/14///P1110_PSA_DS_P1110_C7_2_1///Offset in the file: 0x1FFF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693196780 and software number 10SW017935. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
969299658010SW029083Citroën Jumpy
969300178010SW017935Peugeot Expert, Peugeot Jumpy, Citroën
969314248010SW017935Citroën C4
969314268010SW017935Citroën Cactus, Citroën C4
969319678010SW034734Peugeot 5008
969319688010SW007017Peugeot 5008
969319688010SW017935Peugeot 308
969319698010SW017855Peugeot 5008

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page