Original file

Citroën Jumpy Bosch EDC17C60 9693207180 / 10SW034965

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Citroën Jumpy, hardware number 9693207180 and software number 10SW034965, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Citroën Jumpy1.6 diesel 120PS
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
9693207180
Software number
10SW034965
Vehicle maker's hardware number
9877777777
Software / calibration
6E2N_PIE9B_4A6O5_9693207180

Technical data

Vehicle
BrandCitroën
Car modelJumpy
Engine1.6 diesel 120PS
Power120.0PS / 88.3kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9693207180
Software number10SW034965
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyde9d221f16d5dda7
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW034965Offset in the file: 0x00001A
Vehicle maker's hardware number9877777777Offset in the file: 0x11B25C
Software / calibration6E2N_PIE9B_4A6O5_9693207180Offset in the file: 0x1FCF08
Bosch project identifier (EPK)58/1/EDC17C60/014/1110//C72b/6E2N_PIE9B_4A6O5_9693207180//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693207180 and software number 10SW034965. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
969320708010SW034925Peugeot Partner
9693207180017935Citroën Jumpy
96932071801037555072Citroën Jumpy
969320718010SW017935Citroën Jumpy
969320728010SW034962Peugeot Jumpy
9693228180017935Peugeot Partner
96932281801037538361Citroën Berlingo
96932281801037540764Citroën Berlingo

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page