Original file

Peugeot Jumpy Bosch EDC17C60 9693207280 / 10SW034962

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot Jumpy, hardware number 9693207280 and software number 10SW034962, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot Jumpy1.6 diesel 95PS
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
9693207280
Software number
10SW034962
Vehicle maker's hardware number
9877777777
Software / calibration
6D2N_PHF9B_4A6O7_9693207280

Technical data

Vehicle
BrandPeugeot
Car modelJumpy
Engine1.6 diesel 95PS
Power95.0PS / 69.9kW
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9693207280
Software number10SW034962
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File keyf410f2dd1cd229ae
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW034962Offset in the file: 0x00001A
Vehicle maker's hardware number9877777777Offset in the file: 0x11B25C
Software / calibration6D2N_PHF9B_4A6O7_9693207280Offset in the file: 0x1FCF08
Bosch project identifier (EPK)58/1/EDC17C60/014/1110//C72b/6D2N_PHF9B_4A6O7_9693207280//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693207280 and software number 10SW034962. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
9693207180017935Citroën Jumpy
96932071801037555072Citroën Jumpy
969320718010SW017935Citroën Jumpy
969320718010SW034965Citroën Jumpy
9693228180017935Peugeot Partner
96932281801037538361Citroën Berlingo
96932281801037540764Citroën Berlingo
96932281801037555072Citroën Berlingo

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page