Original file

Peugeot 208 Bosch EDC17C60 9693253780 / 10SW036630

An original (stock) flash read of the Bosch EDC17C60 control unit, fitted in Peugeot 208, hardware number 9693253780 and software number 10SW036630, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Peugeot 2081.6 diesel 100HP
Control unit
Bosch EDC17C60
Read type
OBD read (no boot area)
File
2,048.00 KB · Flash
Hardware number
9693253780
Software number
10SW036630
Vehicle maker's hardware number
9877777777
Software / calibration
6D2N_1NB9B_4A8O6_9693253780

Technical data

Vehicle
BrandPeugeot
Car model208
Engine1.6 diesel 100HP
Control unit
Control unitBosch EDC17C60
ECU makerBosch
Hardware number9693253780
Software number10SW036630
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key2c1f96a5d11602cc
Identification read from the file
ECU nameEDC17C60
Read typeOBD read (no boot area)
Bosch part / software10SW036630Offset in the file: 0x00001A
Vehicle maker's hardware number9877777777Offset in the file: 0x11B25C
Software / calibration6D2N_1NB9B_4A8O6_9693253780Offset in the file: 0x1FCF08
Bosch project identifier (EPK)58/1/EDC17C60/014/1110//C72b/6D2N_1NB9B_4A8O6_9693253780//Offset in the file: 0x1FCF08

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C60 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 9693253780 and software number 10SW036630. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C60

HardwareSoftwareVehicles
96932535801037555072Peugeot 308
969325358010SW036614Peugeot 2008, Peugeot Berlingo, Citroën
96932536801037555072Peugeot 2008
969325368010SW017935Peugeot 2008
96932798801037555072Peugeot 208
9693281980017935Citroën Berlingo
9693281980037114Peugeot Partner
969328198010SW017935Peugeot Partner, Peugeot Berlingo, Peugeot BERLINGO 3

Bosch EDC17C60 original files

The Bosch EDC17C60 unit page