Original file

JMC baodian Bosch EDC17C63 EDC17C63 / 10SW036581

An original (stock) flash read of the Bosch EDC17C63 control unit, fitted in JMC baodian, hardware number EDC17C63 and software number 10SW036581, 1,536.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
JMC baodian2.9 diesel 124PS
Control unit
Bosch EDC17C63
Read type
Full read (boot area included)
File
1,536.00 KB · Flash
Hardware number
EDC17C63
Software number
10SW036581
Software / calibration
P1671_N310_V310

Technical data

Vehicle
BrandJMC
Car modelbaodian
Engine2.9 diesel 124PS
Power124.0PS / 91.2kW
Control unit
Control unitBosch EDC17C63
ECU makerBosch
Hardware numberEDC17C63
Software number10SW036581
File
File typeOriginal flash read
File size1,536.00 KB (1,572,864 bytes)
File key719ca14ba31e1c68
Identification read from the file
ECU nameEDC17C63
Read typeFull read (boot area included)
ProcessorTC1724
Bosch part / software10SW036581Offset in the file: 0x08001A
Software / calibrationP1671_N310_V310Offset in the file: 0x020200
Bosch project identifier (EPK)55/1/EDC17_C63/1671/P1671_N310_V310//P1671_N310_V310///Offset in the file: 0x020200

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C63 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number EDC17C63 and software number 10SW036581. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C63

HardwareSoftwareVehicles
Bosch EDC17C63
10SW010898Isuzu Rodeo
10SW044406JMC Jiangling Yuhu
02810313311037560642

Bosch EDC17C63 original files

The Bosch EDC17C63 unit page