Original file

Volkswagen Crafter 2.0 TDI Bosch EDC17C64 03L906021A / 1037556903

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Volkswagen Crafter 2.0 TDI, hardware number 03L906021A and software number 1037556903, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Crafter 2.0 TDI2.0 diesel 114.2PS / 84.0kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906021A
Software number
1037556903
Vehicle maker's hardware number
03L906021

Technical data

Vehicle
BrandVolkswagen
Car modelCrafter 2.0 TDI
Engine2.0 diesel 114.2PS / 84.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number03L906021A
Software number1037556903
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keye5d3530a96122d5d
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software1037556903Offset in the file: 0x02001A
Vehicle maker's hardware number03L906021Offset in the file: 0x33A2D8
Software / calibration03L906021A · version 8498Offset in the file: 0x33A2F2
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P875//C875DS6ZP///Offset in the file: 0x03C178

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906021A and software number 1037556903. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
03L9060211037536266Volkswagen
03L9060211037544681Volkswagen Crafter
03L9060211037556905Volkswagen Crafter
03L906021A1037544682Volkswagen Crafter 2.0 TDI, Volkswagen Crafter
03L906021B1037536268Volkswagen Crafter
03L906021B1037544683Volkswagen Crafter
03L906021B1037556904Volkswagen Crafter
03L906021C1037536269Volkswagen Crafter

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page