Original file

Volkswagen Crafter Bosch EDC17C64 03L906021N / 1037564180

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Volkswagen Crafter, hardware number 03L906021N and software number 1037564180, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Crafter2.0 diesel 140PS
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
03L906021N
Software number
1037564180
Vehicle maker's hardware number
03L906021

Technical data

Vehicle
BrandVolkswagen
Car modelCrafter
Engine2.0 diesel 140PS
Power140.0PS / 103.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number03L906021N
Software number1037564180
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyea2e82a49428079b
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software1037564180Offset in the file: 0x28301A
Vehicle maker's hardware number03L906021Offset in the file: 0x342528
Software / calibration03L906021N · version 9977Offset in the file: 0x342542
Bosch project identifier (EPK)34/1/EDC17C64/5/P875//C875DS7K5///Offset in the file: 0x283A14

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 03L906021N and software number 1037564180. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Volkswagen CrafterFlash4,096.00 KB€15Add to cart
Volkswagen Crafter 2.0 TDIFlash8,192.00 KB€15Add to cart

All reads of 03L906021N / 1037564180

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
03L906021C1037544684Volkswagen Crafter
03L906021C1037556902Volkswagen Crafter
03L906021M1037556996Volkswagen Crafter, Volkswagen Crafter 2.0 TDI
03L906021N1037556995Volkswagen Crafter, Volkswagen Crafter 2.0 TDI
03L906021P1037556997Volkswagen Crafter, Volkswagen Crafter 2.0 TDI
03L906021Q1037556994Volkswagen Crafter
03L997009G1037561020Volkswagen pcmflash, Volkswagen Crafter
04F906021A1037550011Volkswagen

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page