Original file

Audi Q3 Bosch EDC17C64 04L906016BE / 04L906016BE

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi Q3, hardware number 04L906016BE and software number 04L906016BE, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q32.0 diesel · 150.0PS / 110.3kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906016BE
Software number
04L906016BE
Bosch part / software
10SW013879
Vehicle maker's hardware number
04L907309K

Technical data

Vehicle
BrandAudi
Car modelQ3
Engine2.0 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906016BE
Software number04L906016BE
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key609f89fc34ae92b0
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW013879Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309KOffset in the file: 0x337BC2
Software / calibration04L906016BE · version 2912Offset in the file: 0x337BDC
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8B8///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906016BE and software number 04L906016BE. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906016BD10SW007879Volkswagen pcmflash
04L906016BD10SW010581Volkswagen pcmflash
04L906016BE000581Audi Q3 2.0 TDI CR, Audi Q3
04L906016BE013879Audi Q5 2.0 TDI, Audi 8U 2.0 TDI CR EU6
04L906016BE1037551298Audi Q3 2.0 TDI CR
04L906016BE10SW000581Volkswagen pcmflash
04L906016BE10SW013879Audi Q3 2.0 TDI CR DPF, Audi pcmflash, Volkswagen
04L906016BF000579Audi Q3 2.0 TDI CR, Audi Q3

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page