Original file

Audi Q3 Bosch EDC17C64 04L906016BF / 000579

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi Q3, hardware number 04L906016BF and software number 000579, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q32.0 diesel · 150.0PS / 110.3kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906016BF
Software number
000579
Bosch part / software
10SW000579
Vehicle maker's hardware number
04L907309K

Technical data

Vehicle
BrandAudi
Car modelQ3
Engine2.0 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906016BF
Software number000579
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
From the file name148
File key3b3a40526e730147
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW000579Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309KOffset in the file: 0x33629A
Software / calibration04L906016BF · version 1078Offset in the file: 0x3362B4
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8B5///Offset in the file: 0x048F70

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906016BF and software number 000579. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other reads of this pair

The same hardware and software numbers, read from other vehicles or at other times; each has its page.

VehiclesSizePriceAdd to cart
Audi Q3 2.0 TDI CRFlash4,096.00 KB€15Add to cart

All reads of 04L906016BF / 000579

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906016BE04L906016BEAudi Q3
04L906016BE1037551298Audi Q3 2.0 TDI CR
04L906016BE10SW000581Volkswagen pcmflash
04L906016BE10SW013879Audi Q3 2.0 TDI CR DPF, Audi pcmflash, Volkswagen
04L906016BF013877Audi Q3 2.0 TDI (150) Clean Diesel Quattro - 150hp, Audi Q3
04L906016BF04L906016BFAudi Q3
04L906016BF1037549977Audi Q3 2.0 TDI
04L906016BF10SW000579Volkswagen pcmflash

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page