Original file

Audi Q3 2.0 TDI Bosch EDC17C64 04L906016BH / 10SW022988 P866G8B8

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi Q3 2.0 TDI, hardware number 04L906016BH and software number 10SW022988 P866G8B8, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q3 2.0 TDI2.0 diesel 184PS
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906016BH
Software number
10SW022988 P866G8B8
Bosch part / software
10SW022988
Vehicle maker's hardware number
04L907309K

Technical data

Vehicle
BrandAudi
Car modelQ3 2.0 TDI
Engine2.0 diesel 184PS
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906016BH
Software number10SW022988 P866G8B8
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key2ad9192cda96c6da
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW022988Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309KOffset in the file: 0x337BC2
Software / calibration04L906016BH · version 2916Offset in the file: 0x337BDC
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8B8///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906016BH and software number 10SW022988 P866G8B8. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906016BH1037533463Audi Q3
04L906016BH1037551297Audi Q3 2.0 TDI, Audi Q3 s2 dpf egr 2.0 TDI CR DPF, Audi Q3
04L906016BH10SW000577Audi pcmflash, Audi Pr, Audi Q3 R4 2,0L CUWA
04L906016BH10SW022988Volkswagen pcmflash
04L906016BJ04L906016BJSeat Alhambra, Seat Sharan, Volkswagen
04L906016BJ1037533463Volkswagen Tiguan
04L906016BJ10SW000857Volkswagen Sharan
04L906016BJ10SW000857 P866G8A4Seat Alhambra 2.0 TDI

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page