Original file

Volkswagen Passat Bosch EDC17C64 04L906016DN / 04L906016DN

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Volkswagen Passat, hardware number 04L906016DN and software number 04L906016DN, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Volkswagen Passat2.0 diesel · 149.6PS / 110.0kW
Control unit
Bosch EDC17C64
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
04L906016DN
Software number
04L906016DN
Bosch part / software
10SW000166
Vehicle maker's hardware number
04L907309G

Technical data

Vehicle
BrandVolkswagen
Car modelPassat
Engine2.0 diesel
Power149.6PS / 110.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906016DN
Software number04L906016DN
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key449759503e97b446
Identification read from the file
ECU nameEDC17C64
Read typeCalibration only (data set)
Bosch part / software10SW000166Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309GOffset in the file: 0x341992
Software / calibration04L906016DN · version 1477Offset in the file: 0x3419AC
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DF86F///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906016DN and software number 04L906016DN. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906016DL1037533463Audi Q3
04L906016DL1037552403Audi Q3
04L906016DL10SW013825Audi Q3, Audi pcmflash
04L906016DN007738Volkswagen Passat 2.0 TDI
04L906016DN04L907309GVolkswagen Passat
04L906016DN10SW007738Volkswagen pcmflash
04L906016DP04L906016DPVolkswagen Scirocco
04L906016DP04L907309GVolkswagen Passat

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page