Original file

Škoda Yeti Bosch EDC17C64 04L906016HL / 010074

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Škoda Yeti, hardware number 04L906016HL and software number 010074, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Yeti2.0 diesel · 150.0PS / 110.3kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906016HL
Software number
010074
Bosch part / software
10SW010074
Vehicle maker's hardware number
04L907309K

Technical data

Vehicle
BrandŠkoda
Car modelYeti
Engine2.0 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906016HL
Software number010074
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key1fa01e0a637718e5
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW010074Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309KOffset in the file: 0x334DBE
Software / calibration04L906016HL · version 3228Offset in the file: 0x334DD8
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DG8PA///Offset in the file: 0x047B98

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906016HL and software number 010074. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906016HK04L906016HKVolkswagen Sharan, Volkswagen Tiguan
04L906016HK1037533463Volkswagen Alhambra II 2.0 TDI, Volkswagen Sharan 2.0 TDI, Volkswagen Sharan
04L906016HK10SW004095Seat Alhambra
04L906016HK10SW009929Volkswagen Golf
04L906016HL04L906016HLŠkoda Yeti, Škoda pcmflash, Volkswagen
04L906016HL04L907309KŠkoda Yeti
04L906016HL1037533463Škoda Yeti
04L906016HM04L906016HMŠkoda Yeti, Škoda pcmflash, Volkswagen

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page