Original file

Audi A4 Bosch EDC17C64 04L906021BH / 04L906021BH

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi A4, hardware number 04L906021BH and software number 04L906021BH, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel · 190.3PS / 140.0kW
Control unit
Bosch EDC17C64
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
04L906021BH
Software number
04L906021BH
Bosch part / software
10SW000886
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel
Power190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021BH
Software number04L906021BH
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key7e5b181382a2f5b1
Identification read from the file
ECU nameEDC17C64
Read typeCalibration only (data set)
Bosch part / software10SW000886Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309Offset in the file: 0x3345D0
Software / calibration04L906021BH · version 8509Offset in the file: 0x3345EA
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7PO///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021BH and software number 04L906021BH. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021BG10SW000286 P866E7POAudi A4 2.0 TDI
04L906021BG10SW006126Audi A4
04L906021BG10SW085248Audi
04L906021BH000886Audi A5 2.0 TDI, Audi A5 2.0 TDI CR
04L906021BH083362Audi A4 2.0 TDI
04L906021BH1037548924Audi A4, Audi A5 Sportback 2.0 TDI, Audi pcmflash
04L906021BH10SW000886Audi pcmflash
04L906021BH10SW083362Audi

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page