Original file

Audi pcmflash Bosch EDC17C64 04L906021BK / 04L906021BK

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi pcmflash, hardware number 04L906021BK and software number 04L906021BK, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 190PS
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906021BK
Software number
04L906021BK
Bosch part / software
10SW000283
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 190PS
Power190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021BK
Software number04L906021BK
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key0afe40e6b3d5bb6f
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW000283Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309Offset in the file: 0x3345D0
Software / calibration04L906021BK · version 8476Offset in the file: 0x3345EA
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7PO///Offset in the file: 0x04AEEC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021BK and software number 04L906021BK. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021BH1037548924Audi A4, Audi A5 Sportback 2.0 TDI, Audi pcmflash
04L906021BH10SW000886Audi pcmflash
04L906021BH10SW083362Audi
04L906021BK000283Audi A4 2.0 TDI
04L906021BK1037549086Audi A4 Allroad Quattro 2.0 TDI, Audi A4 2.0 TDI, Audi A6 2.0 TDI
04L906021BK10SW000283Audi A4
04L906021BL000885Audi A4 2.0 TDI (190) Multitronic - 190hp
04L906021BL04L906021BLAudi A4

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page