Original file

Audi A4 Bosch EDC17C64 04L906021BK / 10SW000283

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi A4, hardware number 04L906021BK and software number 10SW000283, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A42.0 diesel 150PS
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906021BK
Software number
10SW000283
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelA4
Engine2.0 diesel 150PS
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021BK
Software number10SW000283
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6825aa5102e4086a
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW000283Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309Offset in the file: 0x3345D0
Software / calibration04L906021BK · version 8476Offset in the file: 0x3345EA
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7PO///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021BK and software number 10SW000283. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021BH10SW083362Audi
04L906021BK000283Audi A4 2.0 TDI
04L906021BK04L906021BKAudi pcmflash
04L906021BK1037549086Audi A4 Allroad Quattro 2.0 TDI, Audi A4 2.0 TDI, Audi A6 2.0 TDI
04L906021BL000885Audi A4 2.0 TDI (190) Multitronic - 190hp
04L906021BL04L906021BLAudi A4
04L906021BL084433Audi A4 2.0 TDI CR
04L906021BL1037549087Audi A4, Audi A4 2.0 TDI CR, Audi pcmflash

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page