Original file

Audi A6 Bosch EDC17C64 04L906021BP / 1037555962

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi A6, hardware number 04L906021BP and software number 1037555962, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A62.0 diesel 140KW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906021BP
Software number
1037555962
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelA6
Engine2.0 diesel 140KW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021BP
Software number1037555962
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key4f9508eba7856a6f
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
ProcessorTC1797
Bosch part / software1037555962Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309Offset in the file: 0x335BC4
Software / calibration04L906021BP · version 1661Offset in the file: 0x335BDE
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7PR///Offset in the file: 0x048540

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021BP and software number 1037555962. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021BM10SW000890Audi A5
04L906021BP000891Audi A6
04L906021BP012035Audi A6, Audi A6 2.0 TDI CR, Audi A6 2.0 TDI CR DPF
04L906021BP04L906021BPAudi A6
04L906021BP10SW000891Audi A6
04L906021BP10SW012035Audi A4
04L906021BP10SW012035 P866E7PRAudi A6 2.0 TDI
04L906021BQ000278Audi A5 2.0 TDI

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page