Original file

Audi A6 2.0 TDI Bosch EDC17C64 04L906021BP / 10SW012035 P866E7PR

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi A6 2.0 TDI, hardware number 04L906021BP and software number 10SW012035 P866E7PR, 2,048.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A6 2.0 TDI2.0 diesel 190.0PS / 139.7kW
Control unit
Bosch EDC17C64
Read type
Calibration only (data set)
File
2,048.00 KB · Flash
Hardware number
04L906021BP
Software number
10SW012035 P866E7PR
Bosch part / software
10SW012035
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelA6 2.0 TDI
Engine2.0 diesel 190.0PS / 139.7kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021BP
Software number10SW012035 P866E7PR
File
File typeOriginal flash read
File size2,048.00 KB (2,097,152 bytes)
File key261c23dd8662fd17
Identification read from the file
ECU nameEDC17C64
Read typeCalibration only (data set)
Bosch part / software10SW012035Offset in the file: 0x08301A
Vehicle maker's hardware number04L907309Offset in the file: 0x135BC4
Software / calibration04L906021BP · version 3503Offset in the file: 0x135BDE
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7PR///Offset in the file: 0x0847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021BP and software number 10SW012035 P866E7PR. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021BP04L906021BPAudi A6
04L906021BP1037555962Audi A6
04L906021BP10SW000891Audi A6
04L906021BP10SW012035Audi A4
04L906021BQ000278Audi A5 2.0 TDI
04L906021BQ04L906021BQAudi A4, Audi pcmflash
04L906021BQ1037548919Audi A5, Audi A4 2.0 TDI CR, Audi A4 2.0 TDI
04L906021BS1037548926Audi A4, Audi A4 2.0 TDI, Audi A5 2.0 TDI

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page