Original file

Audi Q5 2.0 TDI Bosch EDC17C64 04L906021CF / 10SW000274 P866E7PO

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi Q5 2.0 TDI, hardware number 04L906021CF and software number 10SW000274 P866E7PO, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi Q5 2.0 TDI2.0 diesel 150PS
Control unit
Bosch EDC17C64
Read type
Calibration only (data set)
File
4,096.00 KB · Flash
Hardware number
04L906021CF
Software number
10SW000274 P866E7PO
Bosch part / software
10SW000274
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelQ5 2.0 TDI
Engine2.0 diesel 150PS
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021CF
Software number10SW000274 P866E7PO
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key365b877924ec8ce3
Identification read from the file
ECU nameEDC17C64
Read typeCalibration only (data set)
Bosch part / software10SW000274Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309Offset in the file: 0x3345D0
Software / calibration04L906021CF · version 8468Offset in the file: 0x3345EA
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7PO///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021CF and software number 10SW000274 P866E7PO. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021CF04L906021CFAudi Q5
04L906021CF1037549105Audi pcmflash, Audi Q5, Audi A4
04L906021CF1037550845Audi Q5, Audi pcmflash, Audi A6
04L906021CF10SW000274Audi pcmflash
04L906021CF10SW085239Audi
04L906021CG000841Audi A4 2.0 TDI CR
04L906021CG1037549100Audi A6 2.0 TDI CR, Audi pcmflash
04L906021CG1037550844Audi Q5, Audi A6 2.0 TDI CR, Audi pcmflash

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page