Original file

Audi A3 Bosch EDC17C64 04L906021D / 04L906021D

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi A3, hardware number 04L906021D and software number 04L906021D, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi A32.0 diesel · 150.0PS / 110.3kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906021D
Software number
04L906021D
Bosch part / software
10SW011999
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelA3
Engine2.0 diesel
Power150.0PS / 110.3kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021D
Software number04L906021D
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key5de84095bdc6c56a
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW011999Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309Offset in the file: 0x332316
Software / calibration04L906021D · version 9283Offset in the file: 0x332330
Internal build stringME(D)/EDC17 B_CB.02.03.00Offset in the file: 0x00FE50
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DB84V///Offset in the file: 0x046FE4

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021D and software number 04L906021D. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021CL000280Audi A5 2.0 TDI, Audi A5, Audi A4
04L906021CL1037548923Audi A4, Audi A5, Audi A4 2.0 TDI CR
04L906021CL10SW000280Audi pcmflash, Audi A5
04L906021CL10SW083833Audi A4
04L906021D1037534128Volkswagen Golf 7, Volkswagen Golf
04L906021D1037547202Audi A3 2.0 TDI CR, Audi pcmflash, Volkswagen
04L906021D1037549039Audi A3 2.0 TDI CR, Audi pcmflash, Volkswagen
04L906021D1037552821Volkswagen pcmflash, Volkswagen A4

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page