Original file

Audi pcmflash Bosch EDC17C64 04L906021FF / 04L906021FF

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Audi pcmflash, hardware number 04L906021FF and software number 04L906021FF, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Audi pcmflash2.0 diesel 190PS
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906021FF
Software number
04L906021FF
Bosch part / software
10SW000287
Vehicle maker's hardware number
04L907309

Technical data

Vehicle
BrandAudi
Car modelpcmflash
Engine2.0 diesel 190PS
Power190.3PS / 140.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021FF
Software number04L906021FF
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File key6f48e1901f0eae00
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW000287Offset in the file: 0x02001A
Vehicle maker's hardware number04L907309Offset in the file: 0x3345D0
Software / calibration04L906021FF · version 8479Offset in the file: 0x3345EA
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DE7PO///Offset in the file: 0x04AEEC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021FF and software number 04L906021FF. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021FE10SW000285Audi
04L906021FE10SW000285 P866E7POAudi A6 2.0 TDI
04L906021FE10SW083358Audi
04L906021FF000287Audi Q5 2.0 TDI CR
04L906021FF1037549097Audi Q3 2.0 TDI, Audi pcmflash, Audi 2.0TDI
04L906021FF10SW085231Audi
04L906021FG000284Audi A5 2.0 TDI
04L906021FG04L906021FGAudi pcmflash, Audi A5

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page