Original file

Škoda Rapid Bosch EDC17C64 04L906021FN / 04L906021FN

An original (stock) flash read of the Bosch EDC17C64 control unit, fitted in Škoda Rapid, hardware number 04L906021FN and software number 04L906021FN, 4,096.00 KB. The file is supplied exactly as it was read from the unit, byte for byte; nothing is changed in it.

Is this your file?

Compare these numbers with the label on your control unit before you order.

Vehicle
Škoda Rapid1.6 diesel · 115.6PS / 85.0kW
Control unit
Bosch EDC17C64
Read type
Full read (boot area included)
File
4,096.00 KB · Flash
Hardware number
04L906021FN
Software number
04L906021FN
Bosch part / software
10SW009215
Vehicle maker's hardware number
04L907309E

Technical data

Vehicle
BrandŠkoda
Car modelRapid
Engine1.6 diesel
Power115.6PS / 85.0kW
Control unit
Control unitBosch EDC17C64
ECU makerBosch
Hardware number04L906021FN
Software number04L906021FN
File
File typeOriginal flash read
File size4,096.00 KB (4,194,304 bytes)
File keyea8381934721a041
Identification read from the file
ECU nameEDC17C64
Read typeFull read (boot area included)
Bosch part / software10SW009215Offset in the file: 0x28301A
Vehicle maker's hardware number04L907309EOffset in the file: 0x3424B2
Software / calibration04L906021FN · version 2065Offset in the file: 0x3424CC
Bosch project identifier (EPK)34/1/EDC17C64/5/P866//C866DA867///Offset in the file: 0x2847FC

About this file

Typical uses: restoring a control unit to its factory software after a failed flash or a corrupt memory, a clean base before any change, comparing a read of your own with the original. The checksum is the one of the read; your programmer or the CARTESIAN app corrects it after a change.

In CARTESIAN this original file is the base for DPF off, EGR off, AdBlue (SCR) off, lambda off, swirl flaps off and DTC off, each saved with a correct checksum, and for returning a modified unit to stock.

How to use this file

  1. Order with your e-mail address; the download link comes right after the payment and is valid for 30 days.
  2. Open the file in your programmer, compare its numbers with your unit and check the checksum.
  3. Write it only to a Bosch EDC17C64 whose label carries the same hardware and software numbers.

Before you write Compare the numbers on your control unit with this file, hardware number 04L906021FN and software number 04L906021FN. A file written to a unit with other numbers can damage it. Not sure? Search with your own read on the Database page: it is compared by content.

Other pairs of Bosch EDC17C64

HardwareSoftwareVehicles
04L906021FJ10SW000281Audi pcmflash, Audi A4
04L906021FM011487Audi A6 2.0
04L906021FM1037555964Audi A6
04L906021FM10SW011487Volkswagen pcmflash
04L906021FN10SW001820Volkswagen pcmflash
04L906021FN10SW009215Volkswagen pcmflash
04L906021FQ000865Audi A6 2.0 TDI, Audi 2.0 TDI, Audi A6 2.0 TDI Ultra (190) S-Tronic - 190hp
04L906021FQ04L906021FQAudi A6, Audi pcmflash

Bosch EDC17C64 original files

The Bosch EDC17C64 unit page